Download
Share
Print this page
Sabrent DS-4RSS User Manual
  1. Manuals
  2. Brands
  3. Sabrent Manuals
  4. Docking Station
  5. DS-4RSS
  6. User manual

Sabrent DS-4RSS User Manual

Usb 3.0 4 bay 2.5” hard drive/ssd docking station
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
DS-4RSS
USB 3.0 4 BAY 2.5" HARD DRIVE/SSD DOCKING STATION
User Manual

Advertisement

loading

Related Manuals for Sabrent DS-4RSS

Summary of Contents for Sabrent DS-4RSS

  • Page 1 DS-4RSS USB 3.0 4 BAY 2.5” HARD DRIVE/SSD DOCKING STATION User Manual...
  • Page 2 Plug & Play mounting allows simple swapping of drives and USB 3.0 will transfer your files at speeds up to 5Gbps. In addition, the DS-4RSS supports Raid 0, Raid 1, Raid 3, Raid 5 and Raid 10 configurations.
  • Page 3 DS-4RSS / User Manual PARTS OF THE DOCKING STATION Hard drive slots USB Cable Interface Power Switch Power Cable Interface HDD Slots LEDs Raid selection dip switches Built In Fan Switch Built In Fan USB 3.0 4 BAY 2.5” HARD DRIVE/SSD DOCKING STATION...

  • Page 4: Using The Docking Station

    DS-4RSS / User Manual USING THE DOCKING STATION To use the Docking Station follow these steps 1 - Insert power cable and USB 3.0 cable into the Docking Station 2 - Plug the power cable into an appropriate power source...
  • Page 5 DS-4RSS / User Manual USING THE DOCKING STATION To use the Docking Station follow these steps 3 - Plug the USB 3.0 cable into a USB port on your computer Note: To obtain the fastest speeds, you will need to plug into a USB 3.0 port, although the Docking Station is backwards compatible with USB 2.0 and 1.1, with their corresponding speeds.
  • Page 6 DS-4RSS / User Manual LED INSTRUCTIONS AND INDICATICATORS 1 - Press the power button to turn ON the Docking Station. When the power LED is lit, power is ON. To turn OFF the Docking Station, press the power button while the Docking Station is ON but not in use. When the Docking Station turns OFF, the power LED will also turn OFF.
  • Page 7 DS-4RSS / User Manual LED INSTRUCTIONS AND INDICATORS 3 - The 4 horizontal LEDs each correspond, in order, with the docking ports. ❶ slot, the top LED, ❷ slot, the 2nd LED, ❸ slot, the 3rd LED, ❹ slot, the 4th LED. If no drives are plugged in, all the lights will be off.

  • Page 8: Raid Mode Setup

    DS-4RSS / User Manual RAID MODE SETUP Switches are UP (H)/down (L) The switch order from right to left is 1, 2, 3, 4 #4 switch does not affect a RAID setup ON/L NOTES RAID 0 Disk Block-level Striping across a minimum of 2 Drives...

  • Page 9: Troubleshooting

    -Make sure your power outlet is working. -Plug your USB device directly into a USB port on your computer (if plugged into a USB hub). -If your computer still does not recognize the device, please contact Sabrent support. Connection Is Slow: Make sure the Docking Station is connected to a USB 3.0 port on your computer.