DS-UFNC / USER MANUAL PRODUCT OVERVIEW A: 12V DC input jack B: Power button E: Clone start button C: USB 3.2 (10Gbps) Type-C port F: SATA bay / SATA bay cover D: Clone direction switch G: M.2 socket / M.2 heatsink PACKAGE CONTENT •...
DS-UFNC / USER MANUAL PRODUCT INFORMATION • Sleek and engineered to assist with heat dissipation during the cloning process. • The tool-free insertion/extraction process makes the dock simple to use. • Supports multiple M.2 SSD form factors including 2242, 2260, and 2280.
DS-UFNC / USER MANUAL LED light status 1. Power light - blue. Always on when the power is on. 2. Clone progress indicator - blue, with four sections. Each section indicates 25% progress of the cloning process with all four lit upon 100% completion.
DS-UFNC / USER MANUAL DRIVE INSTALLATION Lift open the M.2 SSD heatsink cover as shown above to access the M.2 M Key socket, readying it for drive installation...
Page 6
DS-UFNC / USER MANUAL As shown in the picture above, insert the M.2 SSD at a slight angle into the M.2 socket of the docking station; please pay attention to the position of the keying gap and do not insert the drive...
Page 7
DS-UFNC / USER MANUAL Close the heatsink door to complete the installation; connect the USB cable to supply power and access the drive...
Page 8
DS-UFNC / USER MANUAL Open the 2.5”/3.5” drive bay and insert the SSD or HDD into the bay in the correct orientation to match the connectors; when using a 3.5” HDD the docking station must have the power adapter connected...
Page 9
DS-UFNC / USER MANUAL NoticeS 1. When using this product during an M.2 SSD installation please be careful to avoid static electricity discharge on the drive (it is recommended to place your hands on a metal object to safely discharge before handling).
DS-UFNC / USER MANUAL Frequently Asked Questions (FAQ) 1. Why is performance slow, not reaching the read and write speed of USB 3.1 Gen 2 on my system? Answer: This product has undergone rigorous testing and the read and write speed can reach USB 3.1 performance under normal read and write conditions.
Page 11
DS-UFNC / USER MANUAL 5. Can NVMe protocol SSDs be used in Windows prior to version 8.1? Answer: Windows 7/8 host systems may need to install an NVMe support patch. Windows 8.1 and later versions have an integrated NVMe driver.