Network - LG CVCA Owner's Manual

Network

You can change the network configuration environment of the System Controller. You can access the
System Controller page via the set value. (See the section of "Network" on page 17.)
1
2
3
4
5
6
7
※ Numbers 7 to 9 are only supported by some models.
No. Item
Automatically
1
Assign IP Address
Type
2
IP Address
3
Subnet Mask
4
Gateway
5
9
8
11
Automatically receives the IP via the Dynamic Host Configuration Protocol
(DHCP) method.
You can select either IPv4 or IPv6 method for the System Controller's IP
address.
If you select IPv6 for the System Controller's IP address system, you
cannot manually set other options.
You can manually set the System Controller's IP address.
After you change the System Controller's IP address, you can access
through the new IP address.
You can manually set Subnet
You can manually set Gateway.
10
Description
Mask.
5