Sony STR-DE598 Operating Instructions Manual page 43

Betbre you begin, make sure you have
connected all components properly.
Recording on an audio tape or
MiniDisc
You can record on a cassette tape or MiniDisc
using the receiver. See the operating instructions
of your cassette deck or MD deck if you need
help.
1
Select the component to be recorded,
2
Prepare the component for playing.
For example, insert a CD into the (D
player.
3 Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
4 Start recording on the recording deck,
then start playback on the playback
component.
Notes
• Sound adjustments do not affect the signal output
from the MDiTAPE OUT jacks.
• The analog audio signals of the current input is
output flora the MDiTAPE OUT jacks.
• The signals input to the MULTI CH INjacks are not
output from the MDiTAPE OUT jacks even when
MULTI CH IN is being used. The analog audio
signals of the cmrent o; previously used input are
output.
Recording on a video tape
You can record from a VCR, a TV or a DVD
player using the receiver. You can also add
audio from a variety of audio sources when
editing a video tape. See the operating
instructions of your VCR or DVD player if you
need help.
1
Select the program source to be
recorded.
Prepare the component for playing.
For example, insert a video tape you want to
record into VCR.
3 Insert a blank video tape into the VCR
(VIDEO 1) for recording.
4 Start recording on the recording VCR,
then start playing the video tape or
DVD you want to record.
Tip
You can record the sound from any audio somce onto
a video tape while copying fiom a video tape or DVD.
Locate the point wheze you want to strut recording
fiom another audio somce, select the program source,
then start playback. The audio fiom that source will be
recorded onto the audio tlack of the video tape instead
of the audio froln the original medium To resume
audio recording from the original medium, select the
video source again
Notes
• You cannot recmd a digital audio signal using a
component connected to tile analog VIDEO 1
AUDIO OUT jacks.
• Make sure to make both digital and analog
connections to the VIDEO 2 and DVD inputs.
Analog recording is not possible if you make only
digital connections.
• The analog audio signals of tile current input are
output from the VIDEO 1 AUDIO OUT jacks.
• The signals input to the MULTI CH IN jacks are not
output from VIDEO 1 AUDIO OUT jacks evenwhen
MULTI CH IN is being used The analog audio
signals of the cmrent or previously used input are
output
o
t_
o
"ID
0
43 Gs