Sony STR-DE598 Operating Instructions Manual page 36

-- COMPONENT VIDEO INPUT
ASSIGN
(Except for models of area code CEL,
CEK)
You can assign a component video input for
another visual input.
1
Press MAIN MENU repeatedly to select
"<CUSTOM >".
Press < or > repeatedly to select
"COMP. V. A.'.
2
3
4
5
Press ENTER.
Press < or > repeatedly to select the
component video input you want to
assign.
Press + or - repeatedly to select the
input you want to assign the
component video input jacks selected
in step 4.
The input you can assign varies _r each
component video input. For details, see
"Selectable component video inputs for
each input".
6
Press ENTER.
Selectable component video
inputs for each input
The initial settings are underlined
VIDEO 2
VIDEO 1, VIDEO 2, VIDEO 3
DVD
VIDEO 1, VIDEO 3. DVD
Note
You cannot assign a visual input to more than one
component video input
-- INPUT MODE
You can switch the audio input mode lbr
components which have digital audio input
jacks
1
Press input buttons to select the input,
2 Press INPUT MODE repeatedly to
select the audio input mode.
The selected audio input mode appears in
the display.
Audio input modes
• AUTO IN
Gives priority to digital signals when there are
both digital and analog connections. If there
are no digital signals, analog is selected.
• (OAX IN
Specifies the digital audio signals input to the
DIGITAL COAXIAL input jack
• OPT IN
Specifies the digital audio signals input to the
DIGITAL OPTICAL input jacks
• ANALOG
Specifies the analog audio signals input to the
AUDIO IN (L'R) jacks
Notes
• When signals with a sampling frequency of mole
than 48 kHz is input tile tone and sOlllldfield cannot
be used
• Some audio input modes may be dimmed depending
on tile input This means that tile selected input is
unavailable
36Gs