Sony STR-DE598 Operating Instructions Manual page 28

[]
[] SW: Lights up when sub woofer selection is
set to "YES" (page 18) and the audio signal is
output from the SUB WOOFER jack.
[] LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
[] SP A/SP B: Lights up in accordance with the
speaker system being used (A or B). Turns off
when speaker output is turned off or when
headphones are comlected.
[] rlrt DIGITAL EX: -rlrt DIGITAL" lights up
when the receiver is decoding signals recorded
in the Dolby Digital I\mnat.
-rlrt DIGITAL EX" lights up when the
receiver is decoding signals recorded in the
Dolby Digital EX format.
[]
O0 PRO LOGIC IIx: "00 PRO LOGIC"
lights up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. -rlrt PRO LOGIC II" lights up when
the Pro Logic II Movie/Music/Game decoder
is activated. "Flrl PRO LOGIC IIx" lights tip
when the Pro Logic IIx Movie/Music/Game
decoder is activated. However, these
indicators do not light up if both the center and
surrotmd speakers are set to "NO" and 3_u
select a sound field using the A.F.D. button.
Note
Dolby P!o Logic IIx decoding does not function
t)r DTS format signals or fc_rsignals wi_,ha
sampling fiequency of more than 48 kHz.
[]
DTS-ES 96/24: "DTS" lights up when DTS
signals are input. "DTS-ES" lights tip when
DTS-ES signals are input. "DTS 96/24" lights
up when the receiver is decoding DTS 96 kHzi
24 bit signals.
Note
When playing a DTS tbmmt disc be sure that you
have made digital connections and that INPUT
MODE is not set to "ANALOG" (page 36).
[] NEO:6: Lights up when DTS Neo:6 Cinema/
Music mode decoding is activated.
[] Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 23Q7 for tuner operations.
Note
"RDS" appears _r models of area code CEL,
CEK only.
[] D.RANGE: Lights up when dynamic range
compression is activated (page 37).
[] COAX: Lights tip when the source signal is a
digital signal being input through the
COAXIAL terminal.
[]
OPT: Lights up when the sottrce signal is a
digital signal being input through the
OPTICAL terminal.
[]
SLEEP: Lights up when sleep timer is
activated.
28 _