Pioneer VSX-5700S Operating Instructions Manual page 27

SELECTING DIFFERENT PROGRAM SOURCES
Program Source [INPUT SELECTOR switch |
To listen to records. | PHONO |
puaifuiata teas ae ea Seen
To listen to compact discs cb |
TAPE 1/DAT
To listen to a tape on the
cassette deck {or digital audio
tape deck} connected to
TAPE 2 jacks.
TAPE 2 MONITOR
To listen to a component '
connected to the LINE jacks.
To watch a video disc on a
video disc player, or to watch a VDPICDV
COV on a CDV player
i {
To watch a TV program
|
received on a TV tuner Tv |
connected to the TV jacks
|
* If you select a music source other than TAPE 2, switch OFF the TAPE
2 MONITOR.
3. Operate the appropriate audio/video component to play back the
program source.
4. Adjust the volume and tone controls as desired.
HOW TO USE THE ACOUSTIC MEMORY
*The sound quality setting is memorized approximately two seconds
Setting the Acoustic Memory
after you last press the SELECT switch.
In this way, the desired tone will be preset in one of the five acoustic
memory positions. To preset four other desired tone settings, perform
the same operations.
Recalling tone setting in the Acoustic Memory
To recall the memorized tone settings, press the SELECT switch to
select the desired memory position.
No indication (FLAT): For flat {normal} frequency response.
1. Adjust the sound quality as desired using the BASS and TREBLE
LOUDNESS:
Emphasis the low- and high-frequency ranges.
control switches.
Produces a fuller sense of sound, particularly when
* Setting are shown by the TONE indicator on the display section.
listening at low volume.
2. Press the MEMORY
switch.
A — E: Memorized acoustic memory settings.
* The ACOUSTIC indicator on the display section blinks on and off.
27
<ARB1250>