Microphone Sri Ccccscccsudletcevtsrepsonssevivsessessevs - Kenwood TM-255A Instruction Manual

REMOTE FUNCTIONS USING THE MICROPHONE
The 4 keys located on the face of the microphone and
labeled [PF], [MR], [VFO], and [CALL] are called the
Programmable Function (PF) keys. Though labeled
with their default functions, each key can be
reassigned by the operator to perform remote
functions conveniently from the microphone.
CALL or vr MR PF
1750
aren
CALL or VFO MR PF
7 AUXILIARY FUNCTIONS
Special Function
AF MUTE
Disables the audio output while the key is held
down.
AF ATT
Reduces the audio level while the key is held down.
MONITOR
Opens the squelch while the key is held down.
MENU ACCESS
Selects the Menu mode.
ENTER
Used with the DTMF microphone keypad for direct
entry of the operating frequency or memory
channel.
MC-45DM/45DME MC-45/45E
Functions that can be assigned to the microphone PF
keys include the following:
* Front Panel buttons
* MenuAorB
* Special Functions: Functions not available on the
Front Panel
een ae eid Ce et |
Menu 00 A/B (VFO) Menu 50
Menu 01 AIP Menu 51
Menu 02 AUTO/FM Menu 52
Menu 03 Tone Alert Menu 53
| Menu 04 CALL Menu 54
VOICE
Activates the Voice synthesizer (VS-2 option).
TF-SET
Displays the transmit frequency in Receive while
the key is held down.
AF
Similar to TF-SET except displays the difference of
the transmit frequency from the receive frequency
while the key is held down.
= Configuring Microphone PF Keys
General Key
Name Menu Function | Default Function
Menu B, No. 70 | Menu Access
(83)
Menu B, No. 71 | Memory Recall
(33)
Menu 05 CLR Menu 55
Menu B, No. 72 | VFO Select (20)
Menu 06 CODE Menu 56
Menu 07 DTSS Menu 57
Menu 08 ir Menu 58
F.LOCK Menu 59
LOW. Menu 60
MHz Menu 61
M.IN Menu 62
MR Menu 63
M>V Menu 64
NB Menu 65
PROC Menu 66
REV Menu 67
RIT Menu 68
SCAN Menu 69
SHIFT Menu 75
SSB/CW Menu 77
TONE Menu 78
Note: The function of the [1750] key on the MC-45E and
MC45DME cannot be changed.
Menu B, No. 73 | Call Channel (24)
1 Select the menu number from the chart above
that corresponds with the PF key you want to
program.
2 Select the number that corresponds to the
function that you want to assign to the PF key.
* Press [F.LOCK] or microphone [UP] to
increment the function number.
+ Press [LOW] or microphone [DWN] to
decrement the function number.
* The function ranges are as follows:
00-08: MenuA
20-42: Front Panel keys
50-78: Menu B
80-87: Special Functions
99: No assigned function
3 Press [F] or [CLR] to complete the setting.
35