Kenwood TM-255A Instruction Manual page 21

3 MENU SETUP
MENU B
Selections
Key Confirmation Beep Tone ON/ OFF
Modulation Mode Audible Indicator ON/ OFF
+ Morse (ON) or Beep (OFF)
Error Alarm ON/ OFF
+ Morse (ON) or Beep (OFF)
Tone/ CTCSS Frequency Select 67.5 to 250.3 Hz
Peak Meter Hold ON/ OFF
Main Tuning Control Enabled during Memory Recall ON/ OFF
Program Scan Hold ON/ OFF
RIT Maximum Frequency Shift 1.1 kHz/ 2.2 kHz
* 1.1 kHz in 10 Hz steps or 2.2 kHz in 20 Hz steps
Automatic Power Off ON/ OFF
Time-Out Timer OFF/ 3/ 5/ 10/ 20/ 30 minutes
FM Microphone Gain UH
+ High (H) or Low (L)
SSB Automatic Microphone Gain Control ON/ OFF
SSB Fine Microphone Gain control -6/ -3/ 0/ 3/ 6 dB
Automatic Page Cancel ON/ OFF
Open Page ON/ OFF
DTSS/ Page Transmit Delay Time (offset/ split only) 350 ms/ 550 ms
Squelch Select li ON/ OFF
* Noise Squelch (OFF) or S-meter Squelch (ON)
S-meter Squelch Hang Time Select Is OFF/ 125/ 250/ 500 ms
Main Tuning Control Lock OFF/ F3/ All
[PROC], [AIP], [NB], [PF] Lock ON/ OFF
Microphone PF1 Key Assignment 00 to 99 Menu Setup
(83)
Microphone PF2 Key Assignment 00 to 99 Memory
Recall (33)
Microphone PF3 Key Assignment 00 to 99 VFO mode
(20)
Microphone PF4 Key Assignment! 00 to 99 Call channel
Recall (24)
PF Button Assignment 00 to 99 Voice
synthesizer
(85)
Channel Display ON/ OFF ON
* Frequency Display (ON) or Channel Display (OFF)
Transverter Frequency Display OFF/ 1240-1299/ 2400-2449
* 1240 to 1299 MHz or 2400 to 2449 MHz in 1 MHz
steps
9600 bps Packet Select ON/ OFF
Automatic Offset Select ON/ OFF
1 MC-45 and MC-45DM only
2 TM-255A (General version) and TM-455A/E: OFF
14