Kenwood TM-255A Instruction Manual page 20

MENU DESCRIPTION MENU ACCESS
with the Menu system, you will appreciate the 41 Press 2s) or microph P M
versatility it offers. No longer is the number and
Setup IF] (2s)
sina apace sad aomaaely aa
complexity of features restricted by the physical size .
of Pasoiaid say " a 2 Select Menu A or Menu B by pressing [A/B] or
The Menus are identified as Menu A and Menu B. microphone [VFO].
Menu A is used to access functions that are frequently + The last menu number used and the current
changed while Menu B is used for less frequently menu selection appear.
Alternate Tuning control.
[F.LOCK], or [LOW], or microphone [UP] or
[DWN].
* When selecting from a group of numeric menu
selections, [F.LOCK] or microphone [UP]
selects in ascending order, and [LOW] or
microphone [DWN] selects in descending
order.
5 After selecting the desired menu selection, press
[F], or [CLR], or microphone [PF] to exit Menu
Loy r Setup.
Note:
@ Accessing menus while the Frequency Lock function is ON
@ ® cancels Frequency Lock temporarily. Frequency Lock is
restored after exiting Menu Setup.
The Automatic Power Off timer stops counting while you are in
Menu Setup.
Refer to the following tables when configuring Menu A or Menu B.
MENU A
Menu No. Description Selections Default
Display Brightness OFF/ d4/ d3/ d2/ d1
+ 4 Illumination levels and OFF (d1: brightest) Ww
CW Keying Delay 100/ 200/ 300/ 400/ 600/ 800/
* Delay time in milliseconds 1000/ 1400/ 1800 ms!
CW Receive Pitch 400 to 1000 Hz
* 50 Hz steps
Busy-Frequency Stop (Program Scan) ON/ OFF
* Enabled (ON) or Inhibited (OFF)
Scan Resume (Program Scan) 0/1
+ Time-operated (0) or Carrier-operated (1)
Memory Scan ON/ OFF
* All Memory channels (ON) or specific channel group
only (OFF)
SSB/CW Frequency Step Size 10 Hz/ 100 Hz/ 1 kHz/ 5 kHz/
+ Alternate Tuning control or microphone [UP]/[DWN] 10 kHz
* 5step sizes
FM Frequency Step Size 10 Hz/ 100 Hz/ 1 kHz/ 5 kHz/
+ Alternate Tuning control or microphone [UP]/[DWN]| 10 KH2/ 12.5 kHz/ 20 kHz/ 25 kHz
* 8 step sizes
AF Level Select
« Low (L) or High (H)
1 TM-455: Full Break-in ("Full") can be selected but this function is not supported.
2 U.S.A. and Canada: 5 kHz
13