Hunter M3627-01 Manual page 10

Wiring: Single Switch
Have a single switch?
Follow these steps:
Connect the white
(grounded) wire from
the ceiling to the white
wire from the fan.
Connect the black wire
(ungrounded) from the
ceiling to the black wire
from the fan.
Refer to CAUTION c.1 on pg. 2
White
Black
Cap the blue wire from
the fan. You will not
need it for single switch
wiring.
M3627-01 • 06/05/17 • © 2017 Hunter Fan Company
Green/Yellow Stripe
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
10
www.HunterFan.com
1.888.830.1326
Dual Switch
Instructions
Connect the three
grounding wires (green,
green/yellow stripe, or
bare copper) coming from
the ceiling, downrod, and
hanging bracket.
Note: To connect the wires,
hold the bare metal leads
together and place a wire
connector over them, then
twist clockwise until tight.