Zanussi ZWJ12591W User Manual

Product manaul

Advertisement

User manual
EN
Washing Machine
ZWJ 12591 W
ZWJ 14591 W

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi ZWJ12591W

  • Page 1 User manual Washing Machine ZWJ 12591 W ZWJ 14591 W...
  • Page 2: Table Of Contents

    • If the appliance has a child safety device, we recommend you ac- tivate it. General Safety • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Do not change the specification of this appliance. www.zanussi.com...
  • Page 3: Safety Instructions

    • Make sure not to cause damage to the mains from the laundry. plug and to the mains cable. Contact the • Do not put a container to collect possible Service or an electrician to change a dam- water leakage under the appliance. Contact aged mains cable. www.zanussi.com...
  • Page 4: Product Description

    Cycle time duration, energy and water consumption are proportion- al to the amount of each load. Detergent dispenser drawer Control panel Door opening handle Rating plate Drain pump Adjustable feet www.zanussi.com...
  • Page 5: Control Panel

    These are presented by relevant num- bers on the following pages. Programme selector dial EXTRA RINSE button SPIN reduction button ECONOMY button SOIL LEVEL button: Display – Heavy START/PAUSE button – Light DOOR LOCKED pilot light PREWASH button www.zanussi.com...
  • Page 6: Table Of Symbols

    By selecting this option the machine performs a • light off: the door can be opened. The pro- prewash cycle before the main wash phase. gramme is finished or the water has been emptied out. www.zanussi.com...
  • Page 7 When you set the wash programme, the icons corresponding to the different phases making up that programme appear on the display. After you have pressed button 7, the only running phase icon stays on. When the programme has finished, the display shows three flashing zero (0.00). www.zanussi.com...
  • Page 8: Washing Programmes

    40° - 30° - Cold RINSE HOLD Main wash - Rinses LIGHT / ECONO- Maximum spin speed at 900 rpm Max. load 4 kg - Reduced load 2 kg PREWASH Synthetic or mixed fabrics: underwear, coloured gar- EXTRA RINSE ments, non-shrink shirts, blouses. www.zanussi.com...
  • Page 9: Delicates

    The spin speed can be reduced. Drain Draining of water Max. load 8 kg For emptying out the water of the last rinse in programmes with the Rinse Hold option set. www.zanussi.com...
  • Page 10: Helpful Hints And Tips

    Remove persistent stains before washing. stain with the fingertips and a cotton cloth. Rub particularly soiled areas with a special de- Rust: oxalic acid dissolved in hot water or a tergent or detergent paste. rust removing product used cold. Be careful www.zanussi.com...
  • Page 11: First Use

    • Ensure that the electrical and water material from the drum. connections comply with the installation • Before the first wash, run a cotton cycle instructions. at the highest temperature without any 1) do not use acetone on artificial silk www.zanussi.com...
  • Page 12: Personalisation

    (see more details in "Detergent dispenser laundry. drawer"). If required, pour fabric softener into the com- partment marked (the amount used must not exceed the «MAX» mark in the drawer). Close the drawer gently. www.zanussi.com...
  • Page 13 2. Press button 8 once. On the display will flashes 3 times and the message Err is dis- appear played. 3. Press button 7 again to start the pro- For the compatibility among the washing pro- gramme. grammes and the options see chapter «Wash- ing programmes». www.zanussi.com...
  • Page 14 Stand by : once the programme has finished reduced. By pressing any button the appliance after a few minutes the energy saving system will come out of the energy saving status. will be enabled. The brightness of the display is www.zanussi.com...
  • Page 15: Care And Cleaning

    Flush it should be removed. out under a tap, to re- Proceed as follows: move any traces of accumulated powder. www.zanussi.com...
  • Page 16 When refitting the pump cover, ensure it is securely re- tightened so as to stop leaks and young children being able to remove it. Cleaning the water inlet filters Remove fluff and objects from the pump. www.zanussi.com...
  • Page 17 1. Put 2 litres of water in the main wash com- Frost precautions partment of the detergent dispenser. If the machine is installed in a place where the 2. Start the programme to drain the water. temperature could drop below 0°C, remove the www.zanussi.com...
  • Page 18: What To Do If

    The filter in the inlet hose or the inlet valve filter are blocked. • Clean the water inlet filters. (See "Cleaning the water inlet filters" for more details). The door is not properly closed. • Close the door firmly. www.zanussi.com...
  • Page 19 The machine vibrates is • Check the correct levelling of the appliance. noisy: The laundry is not evenly distributed in the drum. • Redistribute the laundry. Maybe there is very little laundry in the drum. • Load more laundry. www.zanussi.com...
  • Page 20: Technical Data

    IPX4 Cold water Water supply Maximum Load Cotton 8 kg Spin Speed Maximum 1200 rpm (ZWJ 12591 W) 1400 rpm (ZWJ 14591 W) 1) Connect the water inlet hose to a water tap with a 3/4'' thread. Consumption values www.zanussi.com...
  • Page 21: Installation

    Read carefully the instructions supplied with the kit. Fixing plate kit (4055171146) Available from your authorized dealer. If you install the appliance on a plinth, secure the appliance in the fixing plates. Follow the instructions supplied with the kit. www.zanussi.com...
  • Page 22 Check that The inlet hose is delivered with the machine. the machine does not touch the wall or other kitchen units. Level the washing machine by www.zanussi.com...
  • Page 23 Service Force Centre. The joining piece must appliance. have an internal diameter of 18 mm. If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system. www.zanussi.com...
  • Page 24 In the event of having to change the fuse in the FOUL drainage system, the water will then be plug supplied, a 13 amp ASTA approved taken to a sewage works for treatment before (BS1363/A) fuse must be used. being discharged safely into a river. www.zanussi.com...
  • Page 25: Environmental Concerns

    • Measure out detergent according to the wa- The materials marked with the symbol ter hardness, the degree of soiling and the recyclable. quantity of laundry being washed. >PE<=polyethylene www.zanussi.com...
  • Page 26 www.zanussi.com...
  • Page 27 www.zanussi.com...
  • Page 28 www.zanussi.com/shop...

This manual is also suitable for:

Zwj14591wZwj 12591 wZwj 14591 w

Table of Contents