Connect The Ir Pass-Through Cable - TCL Alto 7 User Manual

5
To disconnect the Bluetooth function, you can:
•
press
control to switch to another source; or
•
disable the Bluetooth function on your device; or
•
press and hold
seconds.

Connect the IR pass-through cable

If the Sound Bar blocks the IR receiver of the TV when
placing directly in front of it, you can connect the Sound Bar
and TV with the supplied IR pass-through cable so that it
can receive signal from the remote control of your TV.
Connect one end of the IR pass-through cable to the IR
pass-through cable connector on your Sound Bar main unit.
Then, place another end with the IR blaster close to the TV
sensor. For information, check the user manual of your TV.
IR pass-through
on the Sound Bar main unit or remote
on the remote control for 3
26