Charge The Battery In The Camera - Via A Computer; Power On/Off; Power On; Standby - DATATEC FLIR E5-XT User Manual

6 Basic operation
6.3.3 Charge the battery in the camera — via a computer
1. Open the cover at the top of the camera.
2. Connect the camera to a computer, using the USB cable.
3. Power on the camera.
Note Charging the battery via a computer takes considerably longer time than using
the battery charger or power supply.

6.4 Power on/off

6.4.1 Power on

To power on the camera, push the On/Off button.

6.4.2 Standby

When the camera is in on and in live mode, push the On/Off button. This puts the camera
in standby mode.
You can also set up the camera to enter standby mode after a period of inactivity. Select
Settings > Device settings > Auto power off.

6.4.3 Power off

To power off the camera, push and hold the On/Off button.
Note Do not remove the battery to power off the camera.

6.5 Save an image

To save an image, pull the trigger.

6.6 File transfer

You can transfer the files from the camera using one of the following methods:
• Connect the camera to a computer with a USB cable.
• Upload the files to cloud storage, see section 11 Cloud connectivity.
12
#T810624; r. AF/93316/93316; en-US