8
Measuring temperatures
Automatic
Here are two infrared images of an isolator in a power line. To make it easier to analyze
the temperature variations in the isolator, the temperature scale in the right image has
been changed to values close to the temperature of the isolator.
Automatic
8.4.2 Change mode
To change the image adjustment mode, select Temperature scale on the main toolbar.
Then select Auto or Manual.
8.4.3 Manual adjustment by touching the screen
When manual mode is active, an adjustment wheel is displayed to the right of the tem-
perature scale.
Figure 8.1 Manual adjustment mode active
#T810624; r. AF/93316/93316; en-US
Manual
Manual
19
Need help?
Do you have a question about the FLIR E5-XT and is the answer not in the manual?