Getting Started - DATATEC FLIR E5-XT User Manual

3

Getting started

Note Before operating the camera, you must read, understand, and follow the warnings
and cautions in section 1 Safety information.
1. Charge the battery.
2. Push the battery into the camera battery compartment.
3. Push the On/Off button to power on the camera.
4. Follow the instructions on the camera screen to set up the camera according to your
preferences.
You can also set up the camera to upload images for storage online. To enable up-
load of images, you need to connect the camera to the internet and pair the camera
with a FLIR Ignite account. Use a computer or other device with internet access and
follow the instructions on the camera screen.
Note You can select the settings as a part of the initial setup of the camera or later
at any time via the Settings menu.
5. To measure a temperature, aim the camera toward the object. Make sure the spot-
meter is on the point of interest. The spotmeter temperature is displayed on the
screen.
6. To save an image, pull the trigger.
#T810624; r. AF/93316/93316; en-US
5