Handlebar Switches - Yamaha XT250L1 2020 Owner's Manual

Instrument and control functions
Clock
1
The clock uses a 12-hour time system.
The clock shows the time even when
2 the vehicle is turned off.
To set the clock:
3
1. Push the "SELECT" button and
"RESET" button together for at
4
least two seconds.
2. When the hour digits start flashing,
push the "RESET" button to set the
5
hours.
3. Push the "SELECT" button, and
6
the minute digits will start flashing.
4. Push the "RESET" button to set
7
the minutes.
5. Push the "SELECT" button and
then release it to start the clock.
8
9
10
11
12
Self-diagnosis device
1. Error code display
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If a problem is detected in any of those
circuits, the display will indicate an error
code.
If the display indicates such an error
code, note the code number, and then
have a Yamaha dealer check the vehi-
cle.
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
4-5

Handlebar switches

Left
1
1. Dimmer switch "
2. Turn signal switch "
3. Horn switch "
Right
ECA11591
1. Engine stop switch "
2. Start switch " "
EAU1234M
1
2
3
/ "
/ "
"
1
2
/ "