Table of Contents
Advertisement
Figure 25. Support rails
2. Select an available 5U space in your rack to install the expansion enclosure.
Important notes:
• When you select a rack location, ensure that the enclosure and its parts are easily accessible. Allow
enough space for the lid to be easily removed and for internal components, such as drives and
secondary expansion modules, to be serviced.
• When all components and drives are installed, the expansion enclosure is heavy. Install the support
rails and enclosure at the lowest available position. Do not install the rails and enclosure above
position U25 in the rack.
3. Remove the inner member of the rail. Push the tab (
shown in Figure 26 on page 32.
Figure 26. Detaching the inner rail section
4. Use four M4 screws to attach the inner rail to the side of the enclosure. Figure 27 on page 32 shows
the screw locations.
Figure 27. Screw locations to attach the inner rail to the enclosure
5. Install the inner section of the rail onto each side of the expansion enclosure, as shown in Figure 28 on
page 33.
32 Storwize V5100 : Quick Installation Guide for MTM 2078-424, 2078-12F, 2078-24F, 2078-92F, and 2078-
U5B
a
) and slide the middle rail member back, as
Advertisement
Table of Contents
