Rsp-980 Specifications_25 - Rotel RSP-980 Owner's Manual

The reason this scheme works is that rooms are resonant sys*
terns (something like "acoustic springs') that respond to stimuli
in predictable ways. In this case, your room displays a charac¬
teristic called 'reciprocity:' It doesn't care if the stimuli (the
subwoofer) is at point A and the evaluation (your ears) is at point
B or the reverse — as long as points A and B remain constanti
RSP-980 Specifications
Audio
Frequency Response:
Signal to Noise Ratio (IHF "A'):
Input Impedance:
Output Impedance:
Total Harmonic Distortion:
Intermodulation Distortion:
Output
Maximum:
Dolby. 300 mV in:
THX. 200 mV in:
5 Hz-20 kHz.-f0.5dB
lOOdB (front), 70 dB (surround)
47 k Ohms
500 Ohms
0.03 % |@1 kHz)
0.03% (400 Hz77kHz, 4:1)
>6 volts
0.9 volt
0.6 volt
Video
Frequency Response:
Signal to Noise Ratio:
Input Impedance:
Output Impedance:
Output level (peak to peak):
General
Power Consumption:
Power Requirements (AC):
Weight
Dimensions (W x H x D):
3 Hz-10 MHz,-3 dB
70 dB
72 ohms (S-Video, Composite)
72 ohms (S-Video, Composite)
1 volt (S-Video, Composite)
35 watts
USvolts 50/60 Hz or
230volts 50/60 Hz
8 Kg/17.6 lb.
440xn0x316mm
17.38'x5'x12.43'
All specifications were accurate when printed. Rotel reserves
the right to make improvements without notice.
RSP-980 OM rev 5,7/15/97, Written by TechniCom