Technics SX-KN200 Manual page 73

IMW--O2m
To clear specific parts or the entire performance
[KN200]
Press the PLAY button to turn it off (STANDBY).
The entire contents of the SEQUENCER are
erased.
PLAY
STAND BY @& ON
[KN400]
The SEQUENCER contents remain in the
memory for about one week after the POWER
button is turned off.
POWER
OFF & ON =
=
m= Toclear the entire contents of the SEQUEN-
SEQUENCER
CER RECORD RECORD POLY 1 POLY 2 CHORD
flash.
m= To clear specific parts of the SEQUENCER
While pressing the button for the SEQUENCER
part you wish to clear (for example, POLY 2), turn
the POWER button on. The indicator for the
specified part flashes.
12