Technics SX-KN200 Manual page 51

Part il
m When the SYNCHRO & BREAK button is on,
the rhythm is started by pressing any key to
the left of the indicated keyboard split point.
—_
. Press the SYNCHRO & BREAK button to turn
it on.
SYNCHRO &
BREAK
oO
Co
2. Press a key to the left of the keyboard split
point. The rhythm starts to play.
KN400 F
aa point
° <0'
B eeret
)
e When the rhythm is playing, the beat is shown
by dots on the display.
IM—--oOzmn
Yas =,
KN200
Lights at the beginning Lights for each beat
of each measure
KN400
Respective indicator lights
on the corresponding beat
e If the SYNCHRO & BREAK button is pressed
on when the rhythm is stopped, the first-beat
indicator flashes with each beat, indicating the
synchro-start standby status.
10
Playing the rhythm
KEY SPLIT button. (Even when the keyboard
is not divided into left and right sections, the
indicator at the split position will light when the
KEY SPLIT button is pressed.)
KEY SPLIT
Cc)
m= TEMPO adjusts how fast or slow the rhythm is
played.
FAST
TEMPO
(MID) PART)
SLOW
¢ Keep a button pressed to change the tempo
continuously. When both buttons are pressed
at the same time, the tempo is set at J =120.
The tempo is shown on the display.
= The DRUMS buttons in the BALANCE section
allow you to adjust the loudness of the drums
to be in perfect balance with the other sounds.
KN200 KN400
BALANCE
BALANCE
BASS &
DRUMS ACCOMP POLY2 POLY 1
ieee
I
BASS. ACCOMP t ACCOMP 2 ACCOMP 3.
sup
BASS &
DRUMS ACCOMP POLY
CVC} +
BASS ACCOMP 1 ACCOMP2 &3
sus -———_1