Technics SX-KN200 Manual page 59

Part Il
Playing the rhythm
Techni-chord
The TECHNI-CHORD feature expands the sound
of your performance so that for each single note
played, a chord is formed when the AUTO PLAY
CHORD or SEQUENCER function is used (refer
to page 14 and Vol. 3, page 3).
TECHNI-CHORD
Oo
o-
IMn--Ozm
Set up your keyboard to play the example below.
C
feel — ==
Oe
EEO
E ry Fr ttD
& 000060008
=e Fe
QOOooe
(= = SS SS SS]
1. Press the ONE-FINGER or FINGERED button
of the AUTO PLAY CHORD to turn it on.
AUTO PLAY
CHORD
ONE-FINGER
O
(
FINGERED
O
C2
MEMORY
O
=
2. Press the TECHNI-CHORD button to turn it on.
TECHNI-CHORD
O
C)
3. KN400: Turn on the POLY 1 button in the
CONDUCTOR.
4. Select the ACCORDION sound in the SOUND
SELECT matrix.
18
5. On the left part of the keyboard, play the note
for the chord.
melody. The melody is automatically played in
block chords.
If the chords for the ACCOMP part have been
stored in the SEQUENCER, the melody can
be played on the entire keyboard. (Refer to
Vol. 3, page 3.)
TECHNI-CHORD functions only for the POLY
sounds.
KN400: Either the POLY 1 or POLY 2 in the
CONDUCTOR can be used for the TECHNI-
CHORD.
KN400: The TECHNI-CHORD functions if the
POLY 1 is selected for the right part and the
POLY 2 L is selected for the left part in the
CONDUCTOR even if the AUTO PLAY
CHORD is off.