Table of Contents
Advertisement
Central Controller Introduction(Part Name)
ON/OFF BUTTON
1
1
The appliance will be started when you press this button and be stopped
when you press this button again.
RUN INDICATOR
2
Indicates that the appliance is on.
MODE BUTTON
3
Press this button to select the operation mode.
FAN BUTTON
4
Used to select desired fan speed in sequence low-medium-high-auto-low.
SWING BUTTON
5
Used to stop or start adjustment louver swinging and set the desired airflow
direction.
TIMER/CLOCK BUTTON
6
Used to set timer on/off and clock time.
ZONE BUTTON
7
Used to set the group/zone.
ENTER BUTTON
8
Used to confirm settings.
CANCEL BUTTON
9
Used to cancel settings.
10
ADD.FUNC. BUTTON
Used to set functions of air purge, hot water, ventilation (fresh air), and
electric heater.
INCREASE SETTING BUTTON
11
Used to raise the set temperature.Settings can be raised in a setting state.
DECREASE SETTING BUTTON
12
Used to lower the set temperature;Settings can be lowered in a setting state.
LIQUID CRYSTAL DISPLAY (LCD) SCREEN
13
Used to display the icons of set functions.
(invalid for models without louver)
(Only valid for models with addition function module)
5
Advertisement
Table of Contents
