Table of Contents
Advertisement
Function Set
2 Timer on hour blinks. Then press " " (increase) or "
(decrease) button to set the desired time.
Each time " " button is pressed, time increases by 1h.
Each time " " button is pressed, time decreases by 1h.
After timer ON hour has been set, press "ENTER" button
to return to timer ON minute setting.
If you don't need timer ON/OFF Setting, press the "CANCEL"
button to cancel.
3 Timer OFF setting can be performed in the same procedure
with timer ON setting.
4 After TIMER ON/OFF setting is completed, press "
(increase) or " ''(decrease) to select desired day, press
"ENTER" button to confirm it, or press "CANCEL" button to
cancel. The selected day will be marked with ".".
For example,
selected are effective.
5 After the setting of seven days a week is completed,
proceed to the setting for group 2, which can be performed
in the same setting procedure as group l. Four groups can
be set at most.
6 You can quit WEEKLY TIMER setting by pressing
"TIMER/CLOCK" or "ON/OFF" button in the group
selection mode.
Checking the current weekly timer setting
Press "TIMER/CLOCK" button to check WEEKLY TIMER
setting in this mode.
Press " " (increase) or " '' (decrease) button to check the
previous or next set time.
You can press "TIMER/CLOCK" button under checking state
to quit checking of WEEKLY TIMER.
If you need to temporarily leave for a few days when weekly timer has been set, at the
meanwhile timer ON/OFF is not permitted to work and continue to work after back, you
can hold down "ON/OFF" button for 3 seconds to turn it off completely. At this moment,
weekly timer set time can still save, but air conditioner will not run.
Weekly timer setting resolution is 1 minute. Timer ON/OFF signal is effective within 1 minute.
shows 7 days of a week all
15
''
"
Timer Group Select
Timer OFF Setting
Timer Day Select
Timer ON Setting
Advertisement
Table of Contents
