Table of Contents
Advertisement
Function Set
Clock
First time using and clock loss caused by unused for a long
time, setting clock of central controller is needed at first.
How to set:
1 Indicators of date and day of week all blinks after turning
on.
2 Press " "and " " to set the current date, day of week,
hour, minute in sequence. Press "ENTER" to confirm.
Clock Correction
Hold down"TIMER/CLOCK" button for 3 seconds under
complete shutoff state to enter clock correct setting.
The settings of clock can be adjusted in the following sequence
and the same method as clock setting.
Year
Month, Day
After the adjustment is completed, press "ENTER" button
to confirm the setting.
After the clock has been set, the central controller will display
the current clock.
1. Clock correction should be set under complete shutoff state.
2. If there are two central controllers in the system, only the clock set on the main central controller is effective.
3. Complete shutoff: When turning on, hold down "ON/OFF" button for 3 seconds will enter complete shutoff
state.
Temporary shutoff: When turning on, press "ON/OFF" button will turn to temporary shutoff state.
Shutoff state in this manual all means temporary shutoff.
Button Locked
ADD. FUNC.
TIMER/CLOCK
SWING
ENTER
CANCEL
How to set:
Hold down "ENTER" button for 3 seconds, the buzzer beeps 4 times indicating the setting is successfully set
and
is displayed on the LCD, indicating that the wired controller is now under the button locked state.
How to cancel:
Hold down "ENTER" button for 3 seconds, the buzzer beeps 4 times indicating the setting is canceled
and
disappears from the LCD, indicating that the button locked function has been canceled.
days of week
Button Locked
After central controller setting is finished, you can set
button locked function to avoid children or other
people's wrong operation.
All operations are invalid after button locked function has
been set. After locking, the central controller still can
ON/OFF
operate normally. And unlocking can only be performed
MODE
FAN
by the central controller.
ZONE
1
hour, minute
11
Date
Clock
2
ADD. FUNC.
TIMER/CLOCK
SWING
ENTER
FAN
3
CANCEL
2
Indicator of
day of week
ON/OFF
MODE
ZONE
Advertisement
Table of Contents
