Table of Contents
Advertisement
a Remote Function
About Remote Function
While you are out, you can listen to any recorded incoming messages (ICM) or change your greeting message
(OGM) from a remote location using a touch tone telephone. To use this function, you must use tone dialing.
The remote control password is needed for remote control operations. Make sure that the password is already
registered, (See page 69.)
y
Also, make sure that your apparatus is set to either Fax/Tel Auto Switching or Fax/Built-in TAM modes. (See
page 47, 48.)
1.
Make the call from an outside telephone.
2.
While you are hearing the OGM.
4.
Enter the remote control password (4 digits).
a
[f])
<= es
-
} i | I | I | 1 i | | 1 | |
4
Enter the remote control code within 10 seconds for the desired
operation. (See page 68.)
« When changing the recorded OGM, additional operation is required
after entering remote control code. (See page 68)
7,
End the call.
67
Advertisement
Table of Contents
