Removing Pad Frames; Pad Frame Positions - Seeley Breezeair EXQ Owner's Manual

REMOVING PAD FRAMES

To remove a pad frame:
1. Remove the clips holding the pad frame
in place.
2. Insert a flat head screw driver into the
slot between the lid and the top of the
pad frame. Lever it so the pad frame is
released.
3. Take hold of the pad frame, pivot it outwards
and lift it up. Be careful not to damage the
pad.
EXQ / EXS
3
EZQ
3
|
8

PAD FRAME POSITIONS

When re-fitting pads, ensure that they are
fitted in their original positions. EXQ210,
EZQ215 and all EXS model coolers have pads
that vary from the standard 90mm thickness.
While removing the pad frames, take note of
the location each belongs to.
Check for stickers indicating correct
locations for thick or cut edge pads.
2
1
ILL187-K
2
Stickers adhered to the fan scroll indicate the
correct position.
If fitted incorrectly they may cause
1
problems:
• Thicker pads may catch on internal
components causing damage.
• Thicker pads may impede the correct
operation of the float valve.
• Incorrect positioning of pads may cause a
ILL950-J
drop in cooler performance.
• Incorrect fitment may allow water to bypass
the pad and be carried over into the air
stream and ducting.
• Water bypass may cause damage to internal
electronic components.