Globalsat BU-353 Installation Manual
Usb gps receiver
Hide thumbs
Also See for BU-353:
- Specifications (2 pages) ,
- User manual (15 pages) ,
- User manual (14 pages)
Advertisement
USB GPS RECEIVER INSTALLATION GUIDE
Ver 2.0
A: Installation Steps:
1. Put the CD with drivers into CD Rom
2. Click the button of "Install Driver" after Auto-run program being executed
3. Run the file " PL-2303 Driver Installer.exe" in the CD directly via " file manager" if the Auto-run program
cannot be executed.
README ver 2.0.doc
060102
Advertisement
Table of Contents
Related Manuals for Globalsat BU-353
Summary of Contents for Globalsat BU-353
- Page 1 USB GPS RECEIVER INSTALLATION GUIDE Ver 2.0 A: Installation Steps: 1. Put the CD with drivers into CD Rom 2. Click the button of ”Install Driver” after Auto-run program being executed 3. Run the file ” PL-2303 Driver Installer.exe” in the CD directly via “ file manager” if the Auto-run program cannot be executed.
- Page 2 5. If the operations above are unsuccessful and cause errors, please exit the software which you currently use and unplug the GPS from the USB port and reinsert it after 10 seconds to reset the device. README ver 2.0.doc...
- Page 3 GPS device from the USB port and wait for at least 10 seconds, then re-connect the GPS device back into your PC. Also note that if you want to re-start your map software, you should also wait at least 10 seconds before re-opening it.
- Page 4 REGARDING ERATTIC MOUSE CURSOR IN WIN2000: 2. If your mouse doesn’t work properly after installation of the GPS driver, this situation is caused by a problem in WIN2000 and is not related to the GPS device. Microsoft has acknowledged and stated that “the serial device (USB is actually converted to serial), may be detected as a serial mouse in WIN2000 O/S.”...
Need help?
Do you have a question about the BU-353 and is the answer not in the manual?
Questions and answers