Advertisement
CONNECTIONS
CONNECTING THE CONTROL OUT
°
TERMINAL
Connect this terminal with using Pioneer components with the
Gal mark.
In this way, the signals received from the remote control unit
will be transmitted to the other components with the
mark.
Connect to the CONTROL
IN terminal of the other com-
ponents you use.
NOTE:
Only
the
pause
function
can
be
controlled by remote control for the
CT-W300.
Cassette tape deck
Use the accessory control cords supplied with the Gal
marked components.
Be sure to insert the plugs securely.
NOTE:
You
cannot
control
the unit using the remote
control unit by
simply making these connections. Be sure to connect the output
cords as well,
CONTROL
—=- To the other components with
the
mark,
Compact disc player
CONNECTING THE POWER CORD (examples)
Turntable
NOTE:
AC outlets and power plugs are either non-polar or polar.
You cannot insert a polar power plug into a non-polar AC outlet.
Connect only equipment which is provided with a non-polar plug
to a non-polar AC outlet.
Ss
<ARB1133>
Compact disc player
AC OUTLETS (SWITCHED)
Power supplied through these outlets is turned on and
off by the amplifier POWER switch. Total electrical power
consumption
of connected
equipment
should
not ex-
ceed 200 W.
AC OUTLET (UNSWITCHED)
Power
flows
continually to this outlet,
regardless
of
whether the amplifier is switched ON or OFF. Electrical
power consumption of the connected equipment should
not exceed 100 W.
The equipment should be disconnected by removing the
power plug from the wall socket when not in regular use,
e.g., when on vacation.
NOTE:
Do not connect appliances with high power consumption such as hea-
ters, irons, or television sets to the AC OUTLETS in order to avoid over-
heating or fire risk.
This can cause the amplifier's to malfunction.
Advertisement
