Radio Frequency (Rf) Energy - Teltonika GH5200 Manual

IC: 27304-GH5200
IC Radiation Exposure Statement
This EUT is in compliance with SAR for general population/uncontrolled exposure limits in IC
RSS-102 and had been tested in accordance with the measurement methods and procedures
specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with
minimum distance of 0 cm between the radiator and your body. This device and its antenna(s) must
not be co-located or operating in conjunction with any other antenna or transmitter.

Radio frequency (RF) energy

This device is designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the United States and
Industry Canada.
During SAR testing, this device is set to transmit at its highest certified power level in all tested
frequency bands, and placed in positions that simulate RF exposure in usage against the head with
no separation, and near the body with the separation of 0 mm. Although the SAR is determined at
the highest certified power level, the actual SAR level of the device while operating can be well
below the maximum value. This is because the device is designed to operate at multiple power levels
so as to use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
The exposure standard for wireless devices employing a unit of measurement is known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg and 1.6 W/kg by Industry
Canada.
This device is in compliance with SAR for general population /uncontrolled exposure limits in
ANSI/IEEE C95.1-1992 and Canada RSS 102 and had been tested in accordance with the
measurement methods and procedures specified in IEEE1528 and Canada RSS 102. This device has
been tested and meets the FCC and IC RF exposure guidelines when tested with the device directly
contacted to the body.
For this device, the highest reported SAR value for usage near the body is 1.179 W/kg.
While there may be differences between the SAR levels of various devices and at various positions,
they all meet the government requirement.
SAR compliance for body-worn operation is based on a separation distance of 0 mm between the unit
and the human body. Carry this device at least 0 mm away from your body to ensure RF exposure
level compliant or lower to the reported level. To support body-worn operation, choose the belt clips
or holsters that do not contain metallic components to maintain a separation of 0 mm between this
device and your body.
RF exposure compliance with any body-worn accessory, which contains metal, was not tested and
certified, and using such body-worn accessory should be avoided.