Table of Contents
Advertisement
NOTE: Ensure hoses are not
kinked or trapped behind
the dishwasher.
NOTE: Issues with hoses or drain will cause machine to malfunction.
Cold water supply
10-80 lpm.
Ensure water is turned on and
the isolator valve is accessible
after fitting.
Hose connection - 3/4".
Cold water pressure -
0.1 – 1Mpa (0.3 - 1.0 Bar)
Incorrect waste pipe configuration.
NOTE: If necessary loosen and
rotate the water hose towards
the water supply and re-tighten.
(Always use the new hose supplied
with the dishwasher).
WARNING! This appliance
must be earthed.
(Socket must be accessible
after fitting).
Correct waste pipe configuration to avoid water flow
from the sink to dishwasher
Exclusive to Howdens
REMOVE
CAP/END
Ensure cap/end is removed
from waste pipe spigot.
WARNING! Do not use extension
cables / adapters.
7
Advertisement
Table of Contents
