Honda INTEGRA 2024 Owner's Manual page 602

uuBrakinguBrake System
■
Automatic Brake Hold
Continuously variable transmission models
Keeps the brake applied after releasing the brake pedal until the accelerator pedal is
pressed. You can use this system while the vehicle is temporarily stopped, like at
traffic lights and in heavy traffic.
■
Turning on the system
Automatic Brake Hold
Button
■
Activating the system
Brake Pedal
600
Fasten your seat belt properly, then start the
engine. Press the automatic brake hold
Comes
On
button.
u The automatic brake hold system
indicator comes on. The system is turned
on.
Depress the brake pedal to come to a
complete stop. The shift lever must not be in
On
( P or ( R .
Comes
On u The automatic brake hold indicator
U.S.
comes on. Braking is kept for up to 10
Comes
minutes.
On
Canada
u Release the brake pedal after the
automatic brake hold indicator comes
on.
1Automatic Brake Hold
WARNING
3
Activating the automatic brake hold system
on steep hills or slippery roads may still
allow the vehicle to move if you remove
your foot from the brake pedal.
If a vehicle unexpectedly moves, it may
cause a crash resulting in serious injury or
death.
Never activate the automatic brake hold
system or rely on it to keep a vehicle from
moving when stopped on a steep hill or
slippery roads.
Continuously variable transmission models
WARNING
3
Using the automatic brake hold system to
park the vehicle may result in the vehicle
unexpectedly moving.
If a vehicle moves unexpectedly, it may
cause a crash, resulting in serious injury or
death.
Never leave the vehicle when braking is
temporarily kept by automatic brake hold
and always park the vehicle by putting the
transmission in and applying the parking
( P
brake.
OwnersManuals2.com