Honda INTEGRA 2024 Owner's Manual page 440

uuWhen DrivinguStarting the Engine
■
Starting to Drive
Continuously variable transmission models
When the engine was started using the
1. Depress and hold the brake pedal, then press the ENGINE START/STOP button.
When the engine was started in any case
2. Keeping your right foot on the brake pedal, put the transmission into
( R when reversing.
3. With the parking brake applied, release the brake pedal and gently depress the
accelerator pedal.
u Make sure the parking brake and brake system indicator (red) goes off.
2 Parking Brake P. 594
438
button on the keyless remote
1Starting to Drive
Manual transmission models with Auto Idle Stop
Engine Restart Function
If the engine stalls, fully depress the clutch pedal
within three seconds. The engine may automatically
restart under certain conditions. Otherwise, follow
the standard procedure.
( D . Select
2 Starting the Engine P. 433
Continuously variable transmission models
When the engine was started using the
the keyless remote
The engine stops when the transmission is taken out
of ( P before the ENGINE START/STOP button is
pressed. Follow step 1 when starting to drive.
All models
You can also release the parking brake by pressing
the electric parking brake switch while depressing the
brake pedal.
When facing downhill, you can start your vehicle
more smoothly by manually releasing it with the
electric parking brake switch than by releasing it with
the accelerator pedal.
button on
OwnersManuals2.com