Honda INTEGRA 2024 Owner's Manual page 597

Continuously variable transmission models
■
Automatic parking brake feature operation
If the automatic parking brake feature has been activated:
• The parking brake is applied automatically when you set the power mode to
VEHICLE OFF.
• To confirm that the parking brake is applied, check if the parking brake and brake
system indicator (red) is on.
2 Activating and deactivating the automatic parking brake feature P. 597
■
To release automatically
Continuously variable transmission models
Depressing the accelerator pedal releases the parking brake.
Use the accelerator pedal to release the parking brake when you are starting the
vehicle facing uphill, or in a traffic jam.
Accelerator Pedal
You can release the parking brake automatically when:
• You are wearing the driver's seat belt.
• The engine is running.
• The transmission is not in P or
(
Gently depress the accelerator pedal.
When on a hill, it may require more
accelerator input to release.
u The parking brake and brake system
indicator (red) goes off.
N .
(
1Parking Brake
In the following situations, the parking brake
automatically operates.
•
When the vehicle stops with the automatic brake
hold system activated for more than 10 minutes.
•
When the driver's seat belt is unfastened while
your vehicle is stopped and brake hold is applied.
•
When the engine is turned off, except by Auto Idle
Stop system, while brake hold system is applied.
•
When there is a problem with the brake hold
system while brake hold is applied.
Models with Adaptive Cruise Control (ACC)
with Low Speed Follow
•
When the vehicle stops more than 10 minutes
while Adaptive Cruise Control (ACC) with Low
Speed Follow is activated.
•
When the driver's seat belt is unfastened while
your vehicle is stopped automatically by ACC with
Low Speed Follow.
•
When the engine is turned off, except by Auto Idle
Stop system, while ACC with Low Speed Follow is
activated.
Continued
uuBrakinguBrake System
OwnersManuals2.com
595