Honda INTEGRA 2024 Owner's Manual page 599

Continuously variable transmission models
■
Activating and deactivating the automatic parking brake feature
With the power mode is in ON, carry out the following steps to either activate or
deactivate the automatic parking brake feature.
1. Shift the select lever to ( P .
2. Without depressing the brake pedal, pull up and release the electric parking brake
switch.
u Check that the parking brake and brake system indicator (red) has come on.
3. Pull up and hold the electric parking brake switch. When you hear a beeping
sound, release the switch and within three seconds pull up and hold the switch
again.
4. When you hear a sound indicating that the procedure is completed, release the
switch.
u Two beeps indicates that the feature has been activated.
u One beep indicates that the feature has been deactivated.
When you have completed activating the feature, the parking brake will
u
remain applied after you turn off the engine.
u To confirm that the parking brake is applied, check if the parking brake and
brake system indicator (red) is on.
1Activating and deactivating the automatic parking brake feature
In cold climates, the parking brake may freeze in
place if applied.
When parking the vehicle, chock the wheels and
make sure the automatic parking brake feature is
deactivated.
Also, when putting your vehicle through a conveyor-
type car wash or when having your vehicle towed,
deactivate the automatic parking brake feature and
leave the parking brake released.
Continued
uuBrakinguBrake System
OwnersManuals2.com
597