Honda INTEGRA 2024 Owner's Manual page 450

uuWhen DrivinguShifting
Manual transmission models
Shifting
■
Shift Lever Operation
Fully depress the clutch pedal to operate the shift lever and change gears, then
slowly release the pedal.
Depress the clutch pedal, and pause for a few seconds before shifting into
shift into one of the forward gears for a moment. This stops the gears so they do not
"grind."
448
When you are not shifting, do not rest your
foot on the clutch pedal. This can cause your
clutch to wear out faster.
1Shift Lever Operation
NOTICE
Do not shift to
( R
complete stop.
Shifting to before stopping can damage the
( R
R , or
(
transmission.
NOTICE
Before downshifting, make sure the engine will not
go into the tachometer red zone. Should this occur, it
can severely damage your engine.
2.0 L engine models
There is a metallic part on the shift lever. If you leave
the vehicle parked outside for a long time on a hot
day, be careful before moving the shift lever. Because
of heat, the shift lever may be extremely hot. If the
outside temperature is low, the shift lever may feel
cold.
If you exceed the maximum speed for the gear you
are in, the engine speed will enter into the
tachometer red zone. When this happens, you may
experience a slight jolt.
before the vehicle comes to a
OwnersManuals2.com