Altitude Navigation - Suunto RACE User Manual

Table of Contents

Advertisement

Suunto Race
1. Select a sport mode that uses GPS.
2. Scroll down and select Map.
3. Select which map style you want to use and confirm with the middle button.
4. Scroll up and start your exercise as normal.
5. Press the middle button to scroll to the map.
NOTE: If Off is selected in map menu, no map will be shown, only a breadcrumb trail.
Select offline maps without exercising:
1. From watch face, swipe up or turn the crown.
2. Select Map.
3. Press the lower button to exit the map.
4. Select Exit.
Map gestures
Lower button
Press to open navigation options
Crown
Turn to zoom in/zoom out
Swipe and tap (if enabled)
Touch and drag the map to pan (if the screen has not been touched for 5 seconds, the
map returns to your current location)
Tap to center the map around tapped location
Flick to scroll the map

5.2. Altitude navigation

If you are navigating a route that has altitude information, you can also navigate based on
ascent and descent using the altitude profile display. During the exercise, swipe left or press
the middle button to switch to the altitude profile display.
The altitude profile display shows you the following information:
top: your current altitude
center: altitude profile showing your current position
bottom: remaining ascent or descent (tap screen to change views)
If you stray too far off from the route while using altitude navigation, your watch will give you
an Off route message in the altitude profile display. If you see this message, scroll to the
route navigation display to get back on track before continuing with altitude navigation.
37

Advertisement

Table of Contents
loading

Table of Contents