Power Saving; Pairing Pods And Sensors - Suunto RACE User Manual

Suunto Race
3. Swipe up and down to scroll through the watch face previews and tap on the one you
want to use.
4. Swipe up and down to scroll through the color options and tap on the one you want to
use.
Each watch face has additional information, such as date or dual time. Tap the display to
switch between views.

3.12. Power saving

Your watch includes a power saving option that turns off all vibration, daily HR and Bluetooth
notifications to extend battery life during normal daily use. For power saving options while
recording activities, see 4.4. Battery power management.
Enable/disable power saving from the settings under General » Power saving or in the
Control panel.
NOTE: Power saving is automatically enabled when the battery level reaches 10%.

3.13. Pairing pods and sensors

Pair your watch with Bluetooth Smart pods and sensors to collect additional information, such
as cycling power, when recording an exercise.
Suunto Race supports the following types of pods and sensors:
Heart rate
•
Bike
•
Power
•
Foot
•
NOTE: You cannot pair anything if airplane mode is on. Turn off airplane mode before
pairing. See 3.5. Airplane mode.
To pair a pod or sensor:
1. Go to your watch settings and select Connectivity.
2. Select Pair sensor to get the list of sensor types.
15