Table of Contents
Advertisement
Suunto Race
3.13.3. Calibrating power pod
For power pods (power meters), you need to initiate the calibration from the sport mode
options in your watch.
To calibrate a power pod:
1. Pair a power pod with your watch if you have not done so already.
2. Select a sport mode that uses a power pod and then open the mode options.
3. Select Calibrate power POD and follow the instructions in the watch.
You should re-calibrate the power pod from time to time.
3.14. Flashlight
Your Suunto Race has an extra bright backlight that you can use as a flashlight.
To activate the flashlight, swipe up from watch face or scroll down with the crown and select
Control panel. Scroll to Flashlight and turn it on by tapping on it or by pressing the crown.
To turn off the flashlight, press the crown or swipe right.
3.15. Alarms
In the Alarms menu of your watch, under Settings you can set different adaptive alarm types.
You can set an alarm for sunrise and sunset and also for storm alarm. See 3.15.1. Sunrise and
sunset alarms and 3.15.2. Storm alarm.
3.15.1. Sunrise and sunset alarms
The sunrise/sunset alarms in your Suunto Race are adaptive alarms based on your location.
Instead of setting a fixed time, you set the alarm for how much in advance you want to be
alerted before the actual sunrise or sunset.
The sunrise and sunset times are determined via GPS, so your watch relies on the GPS data
from the last time you used GPS.
To set sunset/sunrise alarms:
1. From watch face, keep the crown pressed to enter Settings.
2. Scroll to Alarms and enter the menu by tapping on its name or pressing the middle button.
3. Scroll to the alarm that you want to set and select it by tapping on its name or pressing the
crown.
4. Set the desired hours and minutes prior to sunrise/sunset by scrolling up and down with
the crown or by swiping up and down on the screen and confirming with the middle
button.
17
Advertisement
Table of Contents
