Installation and Operating Specification SA-5 10
3.2 Storage
The device must be stored in its original packaging in a dry and
•
weather-proof room.
Avoid exposure to extreme heat and cold.
•
Avoid over-long storage periods (we recommend a maximum of
•
one year).
3.3 Disposal / Recycling
Disposal must be carried out professionally and in an environ-
mentally friendly way in accordance with the respective national
legal stipulations.
"Separate the materials by type and in an environmentally-
friendly way.
"If necessary, commission a specialist company with the waste
disposal.
4 Mounting
4.1 General notes
Attention!
Before installation remove the device from the packing and
•
check for any possible shipping damage! Start-up is not allowed
in the case of transport damage!
Do not mount equipment on vibrating base!
•
When mounted onto lightweight walls, there must be no imper-
•
missibly high vibrations or shock loads. Any banging shut of
doors that are integrated into these lightweight walls, can result
in extremely high shock loads. Therefore, we advise you to
decouple the devices from the wall.
Do not allow drilling chips, screws and other foreign bodies to
•
reach the device interior!
The device should be installed in a location where it will not be
•
disturbed, but at the same time can be easily accessed!
Care must be taken to avoid direct radiation from the sun!
•
L-BAL-E328-GB 2023/33 Index 002
Part.-No.
6/14
Mounting