Installation and Operating Specification SA-5 10
2 Safety instructions
Mounting, electrical connection, and start-up operation may only
•
be carried out by an electrical specialist in accordance with
electrotechnical regulations (e.g. DIN EN 50110 or
DIN EN 60204)!
Persons entrusted with the planning, installation, commissioning
•
and maintenance and servicing in connection with the device
must have the corresponding qualifications and skills for these
jobs. In addition, they must be knowledgeable about the safety
regulations, EU directives, rules for the prevention of accidents
and the corresponding national as well as regional and in-house
regulations.
The equipment is to be used solely for the purposes specified
•
and confirmed in the order. Other uses which do not coincide
with, or which exceed those specified will be deemed unauthor-
ised unless contractually agreed. Damages resulting from such
unauthorised uses will not be the liability of the manufacturer.
The user will assume sole liability.
It is strictly forbidden for work to be carried out on any compo-
•
nents while they are connected to live voltage.
The safe isolation from the supply must be checked using a two-
•
pole voltage detector.
The owner is obliged to ensure that the device is operated in
•
perfect working order only.
Electrical equipment must be checked regularly: Loose connec-
•
tions are to be re-tightened and damaged cables must be
replaced immediately.
Never clean electrical equipment with water or similar liquids.
•
A separate fault and performance monitoring-system with an
•
alarm signal function is necessary in order to prevent personal
injuries and material damages during malfunctions and in case
the device fails. Substitute operation must be taken into consid-
eration!
L-BAL-E328-GB 2023/33 Index 002
Part.-No.
4/14
Safety instructions