Rupes LH31N Original Operating And Maintenance Instructions

Rupes LH31N Original Operating And Maintenance Instructions

Angular sanders

Advertisement

Via Marconi, 3A - 20080 VERMEZZO (Mi) - Italy
Tel. 02/946941 - Fax 02/94941040
e-mail: info_rupes@rupes.it - web: www.rupes.com
LH31N - LH32EN
LH232N
Levigatrici angolari
Angular sanders
Ponceuses angulaires
Winkelschleifer
Lijadoras angulares
Haakse slijpmachines
Угловые полировальные машины
ISTRUZIONI ORIGINALI PER L'USO E LA MANUTENZIONE
ORIGINAL OPERATING AND MAINTENANCE INSTRUCTIONS
NOTICE ORIGINAL D'EMPLOI ET D'ENTRETIEN
ORIGINAL-BEDIENUNGS-UND WARTUNGSANLEITUNG
INSTRUCCIONES ORIGINAL DE USO Y MANUTENCION
AANWIJZINGEN VOOR HET GEBRUIK EN HET
ONDERHOUD ORIGINEEL
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ И
ОБСЛУЖИВАНИЮ 1 ОРИГИНАЛЬНЫЙ

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LH31N and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rupes LH31N

  • Page 1 Via Marconi, 3A - 20080 VERMEZZO (Mi) - Italy Tel. 02/946941 - Fax 02/94941040 e-mail: info_rupes@rupes.it - web: www.rupes.com LH31N - LH32EN LH232N Levigatrici angolari Angular sanders Ponceuses angulaires Winkelschleifer Lijadoras angulares Haakse slijpmachines Угловые полировальные машины ISTRUZIONI ORIGINALI PER L'USO E LA MANUTENZIONE...
  • Page 3: Technical Data

    TECHNICAL DATA ENGLISH TYPE LH232N LH31N LH32EN INSULATION CLASS ABSORBED POWER 1200 W 1200 W 1200 W ELECTRONIC OVERLOAD PROTECTION ELECTRONIC SPEED CONTROL ROTATION RPM 1600÷3400 3400 1400÷3400 MECHANICAL SPEED CONTROL YES* ABRASIVE DISC DIAMETER mm BUFFER DIAMETER MAX mm —...
  • Page 4: Starting And Stopping

    SAFETY WARNINGS APPLICABLE TO POLISHING OPERATIONS BEFORE STARTING THE TOOL Ensure that: Verify that no loosened part of the polishing tool shroud or the - the power supply conforms with the characteristics of the tool; locking ties can rotate freely. Safely position or cut all the loosened - the power supply cable and plug are in perfect condition;...
  • Page 5: Maintenance

    The noise level produced and themean quadratic acceleration value are measured according to regulation DISMOUNTING AND REPLACING ABRASIVE DISCS (LH31N - LH32EN - LH232N) EN 60745-1 - Hold the spindle still with the 17 mm. spanner; Sound pressure level / Sound power level 3 axis vibration level - unscrew the tapered ring nut, loosening it with the pin spanner;...
  • Page 6: Conformity Declaration

    EN 55014-1:2006 + A1:2009 + A2:2011 EN 55014-2:1997 + A1:2001 + A2:2008 EN 61000-3-2:2014 EN 61000-3-3:2013 EN 62233:2008 EN 50581:2012 Technical file at: RUPES S.p.A. Via Marconi, 3A 20080 VERMEZZO (Mi) - Italy S.p.A IL PRESIDENTE Vermezzo (MI), 24/01/2018 G. Valentini...
  • Page 7 RUPES S.p.A. Via Marconi, 3A 20080 VERMEZZO (Mi) - Italy Tel. 02/946941 Fax 02/94941040 Uff. Vendite e assistenza clienti Tel. 02/94694312 e-mail: info_rupes@rupes.it web: http://www.rupes.com...

This manual is also suitable for:

Lh32enLh232n

Table of Contents