Press Play - Panasonic Quasar W-1301 Operating Instructions Manual

Connections you'll need to make. Recording (Editing) unit
Playing (Source) VCR
t
Insert pre-
recorded tape.
!
H
Insert blank tape with
record tab.
Dubbing tapes protected
with Copy Guard will have
poor quality results.
2
Select "LINE" mode.
See "Selecting Input Mode" below.
1 Press PLAY then Press REC, then
PAUSEsLOW I PAUSE at starting _"_c _u=_ PAUSE/SLOW
I_CI_ [_q point toputin _ Q immediately to putin
Standby mode. Standby mode.
(Perform operation of steps 4 and 5 on both units at same time.)
4
Press PLAY
to start dubbing.
_I,_LOW
®
Press PAUSE/SLOW
to start dubbing.
5
"Pl
Press STOP
to stop dubbing.
STOP
®
Press STOP
to stop dubbing.
Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
Method 1 :
Press OH ,&V. The display will change as follows.
Method2:
"--bLINE_125 or Gg_"
a Press ACTION for MAIN MENU.
b Press AV4 lib to select "TV", then press
ACTION for SET UP TV screen.
c Press &V to select"lN PUT SELECT," and
then press I_ to select 'q-UNER" or "LINE."
d Press ACTION twice to exit this mode•
15