Panasonic Quasar W-1301 Operating Instructions Manual page 23

Cancel a Timer Recording: /
(Recording is in progress)
/
Hold down STOP for a few seconds|
,t
o cancel the Timer Recording. i |
• Any future daily or weekly recordings |
will be performed as programmed. J
2
Repeat steps 1 and 2 on page 22.
Press J,V to select
the desired program.
--ADD/DLT
/i
\\ J
3
To Replace program...
1) Press • to display.
2) Press AV to select
and press 4or•
to set new program
contents.
3) Press PROG (or
ACTION).
To Clear program...
Press ADD/DLT.
Press PROG twice (orACTION)
to exit this mode.
O
• 2 minutes before Timer recording is performed,
"PLEASE PREPARE FOR TIMER REC" appears and/
or the PROG TIMER Indicator flashes. Be sure a
cassette with record tab is loaded and the unit is in
Stop mode.
• If the start times of two programs overlap, the lower
numbered program will have priority.
• If the start time for a Timer Recording comes up during
a normal recording or One Touch Recording (page 14),
the Timer Recording will not be performed.
• If there is a power interruption of more than one minute,
the recording may not be performed or continued•
• If "INCOMPLETE" appears after all items have been
set, check all entries and make necessary corrections.
23