Uniden UIP1868P Owner's Manual page 52

note
•When a long distance
call has been set, " 1 "
appears in the display.
•You cannot make a call
from the Caller ID list
if your phone is
connected to a private
branch exchange
(PBX).
[ 5 1 ] C A L L E R I D
Calling a Party from the Caller ID List
Standby mode
1) When the phone is in standby mode, select the
Caller ID message (see "Viewing the Caller ID List"
on page 49).
2) To have the phone dial a "1" before the displayed
Caller ID number, press
phone dial the stored area code before the displayed Caller ID number,
press #/>.
3) Press talk/flash or speaker on the handset or speaker on the base or pick up the
corded handset. The displayed phone number dials automatically.
Talk mode
1) Press talk/flash or speaker on the handset or speaker on the base or pick up the
corded handset.
2) Select the Caller ID message you want to dial (see "Viewing the Caller ID List" on
page 49).
3) Press the DIAL soft key. The displayed phone number will be dialed.
/tone/<. To have the
*
w w w . u n i d e n . c o m