Advertisement
\\
{\\ push out backwards
1, Remove the rear cover.
3. Remove the connection wires from sockets 5)
- ( 8 ) .
eS
of the
5-(2) Removal
of mechanism cover (Fis.6)
1. Move the tonearm to its start position.
2. Remove the securing black screws
(1)-@)
of the mecha-
nism cover.
5-(3) Removal of mechanism
base ass'y (Fis. 7)
1, Remove the securing screws
hinges.
2. Remove securing screws @)-(@), then take out the mech-
anism cover.
of the right and left
from roller
@
1, Remove carrier rope
on
(@ , then take the tonearm off
2. Remove shaft bracke:
the shaft (arm rail).
Note:
When
remounting
tonearm
ass'y, confirm
that the
shutter and guide pins are at right angles with the side of
the tonearm.
L-E600
No. 2586
a6
Advertisement
