SR 50
5.1.12.
REMOVING THE INSTRUMENT PANEL
•
Release and remove the four front screws.
•
Remove the headlight fairing.
•
Release and remove the three top screws.
•
Release and remove the two lower screws.
•
Release the handlebar fairing, move it down and keep
it connected to the turn indicator wirings.
•
Disconnect the instrument panel connector.
WARNING
During reassembly, ensure to perfectly align
the connector with the instrument panel, to
avoid damaging the instrument panel pins.
WWW.PlanDeGraissage.ORG
CYCLE PARTS
5 - 17