Advertisement
1 . POWER ON THE UNIT
1.
Connect the power cord to the
Power Receptacle
2.
Press the
Power Button [J]
of a second to engage power.
LED Signal
A
Indicators
Gain
B
Phantom
C
Power 48 V
Treble Knob
D
Bass Knob
E
Channel
F
Levels
XLR- 1/4"
G
Combo Inputs
Power
H
Receptacle
COLUMN SPEAKER WITH BLUETOOTH
QUICKST ART GUIDE
(H).
Only for QSG
switch for .5
Only for QSG
®
2. PLUG IN THE INPUTS
1.
Turn the
Main Level Knob (O)
the left before connecting any inputs.
2.
Connect your devices to the
all the way to
Input Jacks (G,
P).
Bluetooth
®
I
Power Button
J
Automatic
Feedback
K
Suppression
Music Ducking
L
EQ Presets
M
Limit
N
Indicator
O
Main Level
1/4" Line Input
P
1/4" Mix Out
Q
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Harman JBL IRX ONE
Summary of Contents for Harman JBL IRX ONE
- Page 1 COLUMN SPEAKER WITH BLUETOOTH ® QUICKST ART GUIDE 2. PLUG IN THE INPUTS 1 . POWER ON THE UNIT Connect the power cord to the Turn the Main Level Knob (O) all the way to Power Receptacle (H). the left before connecting any inputs. Only for QSG Press the Power Button [J]...
- Page 2 Per la versione italiana di questo documento, visitare www.jblpro.com/irxone 이 문서의 한국어 버전은 를 방문하십시오문하십시오 www.jblpro.com/irxone www.jblpro.com/irxone 有關本文檔的中文版，請訪問 For complete documentation, visit www.jblpro.com/irxone JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 USA © 2023 Harman International Industries, Incorporated IRXONE Quickstart Guide - 06/2023...
Need help?
Do you have a question about the JBL IRX ONE and is the answer not in the manual?
Questions and answers
On the JBL IRX ONE which channel do I connect my iPad through
You can connect your iPad to the JBL IRX ONE using the Bluetooth input by pressing the Bluetooth Pair button on the back of the unit and selecting "JBL IRX ONE" on your iPad. Alternatively, if using a wired connection, you can connect it to one of the 1/4” Line Inputs on Channel 1, 2, or 3, adjusting the gain and levels accordingly.
This answer is automatically generated
What channel do I plug in my iPad to
You should plug your iPad into a 1/4” Line Input on the Harman JBL IRX ONE. Channels CH1 to CH3 have gain controls for line sources, so you can use one of these channels and set the gain to 9 o’clock for optimal input. Alternatively, you can connect via Bluetooth by following the pairing instructions.
This answer is automatically generated