Casio Edifice ECB-500D-1A Operation Manual page 6

Swapping Your Current Location
Time and World Time
1.
Y Tap the "CASIO WATCH+" icon.
2.
X Hold down (C) for about 0.5 seconds
until the second hand points to the R mark.
The second hand will move to e when a
connection is established between the
watch and phone.
3.
Y Tap "World time".
4.
Y Tap "Home time k World time".
5.
Perform the operation shown on the
phone screen to swap your current
location time with the World Time.
In the Timekeeping Mode, you can
●
check the World Time with the watch's
small hour hand and minute hand.
Before swapping After swapping
Current location time Current location time
n
World Time World Time
Note
This function comes in handy when
●
you need to move to another time
zone. For details about how to use it,
see "Moving to Another Time
Operation Guide 5427
Configuring Timer Settings
1.
Y Tap the "CASIO WATCH+" icon.
2.
X Hold down (C) for about 0.5 seconds
until the second hand points to the R mark.
The second hand will move to e when a
connection is established between the
watch and phone.
3.
Y Tap "Timer".
4.
Y Perform the operation shown on the
phone screen.
Setting the Alarm
1.
Y Tap the "CASIO WATCH+" icon.
2.
X Hold down (C) for about 0.5 seconds
until the second hand points to the R mark.
The second hand will move to e when a
connection is established between the
watch and phone.
3.
Y Tap "Alarm".
4.
Y Perform the operation shown on the
phone screen.
Zone".
Adjusting Hand Alignment
If the hands are out of alignment even though
auto time adjustment is being performed, use
CASIO WATCH+ to adjust them.
1.
Y Tap the "CASIO WATCH+" icon.
2.
X Hold down (C) for about 0.5 seconds
until the second hand points to the R mark.
The second hand will move to e when a
connection is established between the
watch and phone.
3.
Y Tap in the following sequence: f n
"Watch settings".
4.
Y Tap "Adjusting home positions".
5.
Y Perform the operation shown on the
phone screen.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in the
manner mode.
Important!
Do not use this function in areas
●
where phone call tones are
restricted.
The tone sounds at a high volume.
●
Do not use this function when
listening to phone output over
earphones.
1.
X If the watch is connected with a phone,
press (C) to terminate the connection.
Connected After disconnection
n
6