INSTRUMENT AND CONTROL FUNCTIONS
Seat
To remove the seat
1. Insert the key into the seat lock,
turn it counterclockwise, and then
lift the front of the seat up.
1
2
4
1. Seat lock
2. Unlock.
2. Pull the seat forward as shown to
unhook it from the center seat
holder.
EAU50680
1
1. Center seat holder
3. Pull the seat rearward to unhook it
from the rear seat holder, and then
pull it off.
1
1. Rear seat holder
To install the seat
1. Insert the projection on the rear of
the seat into the rear seat holder.
4-13
2. Slide the seat rearward to fit the
slot in its bottom over the center
seat holder.
3. Push the front of the seat down to
lock it in place.
3
1
2
4
1. Projection
2. Rear seat holder
3. Slot
4. Center seat holder
4. Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.